PowerTrip^® surge suppressors protect modern sensitive microprocessor based equipment in the harshest of transient environments.  PowerTrip^® incorporates Voltage and Frequency Responsive Circuitry Technology years ahead of any other devices on the market today. Utilizing proprietary electrochemical encapsulation, PowerTrip® surge protection devices (SPD) dissipate large amounts of surge energy to prolong service life. Features:

• Withstands repeated transients
• Electrochemical Encapsulation Technology
• Fast acting response and recovery time – less than 1 nanosecond response time
• Tight nominal clamping levels
• 10 Modes Protection: L-L, L-N, N-G, L-G Protection
• Sinewave Tracking: low let-through voltage
• EMI/RFI filtering capabilities
• Surge Counters, Audible Alarms and Dry Relay Contacts (optional features)
• 15 and 25 Years Free Replacement Warranty

Compliance:

• UL 1449 2nd Edition and UL 1283 Listed
• ANSI/IEEE C62.41.1-2002 and C62.41.2-2002
• NEMA LS-1(1992)

TerraStat^® is the latest design in lightning dissipation Technology. Science and experience show that TerraStat^® Charge Dissipation Terminals and the structure on which they are installed, are much less likely to sustain a direct lightning strike than unprotected structures or structures with traditional lightning protection systems. Features:

• High grade stainless steel construction
• Lightweight and easy to install
• Corrosion resistant
• Low wind loading
• Large selection of mounting hardware

Compliance:

• UL® Listed and recommended as per API 2003
• Independently tested

Application:

• TS-100: Standard Risk Protection
  • Office buildings, shelters, Industrial facilities, homes and warehouses
• TS-400: Medium Risk Protection
  • Monopoles, high mast lightning and externally mounted camera
• TS-500 (Vertically Mounted): High Risk Protection
  • Communication towers, bridges, petro-chemical storage facilities and stacks
• TS-510 (Horizontally Mounted): High Risk Protection
  • Communication towers, bridges, petro-storage facilities and stacks

The TerraStreamer^® ESE Lightning Terminal utilizes advanced electronics to provide lightning protection to facilities that would otherwise be difficult or cost prohibitive to protect by conventional means. It is an externally mounted, proactive, structural lightning protection device and is designed to activate itself in the moments directly preceding an imminent direct strike. Features:

• High level of protection
• NF C 17-102 and UNE 21 186 tested and certified
• Lightweight and low wind loading
• Reliable performance in all weather conditions
• Suitable for corrosive environments
• Available in five models for multiple applications
• Economical and easy to install
• Five-year replacement warranty

Compliance:

• Certificate of Protection Radius and Fulfillment of standards UNE 21 186 and NF C 17-102 for each model and level
  • Certificate of Withstood Current
  • Certificate of Gain in Triggering Time

• Copper Terminals
• Aluminum Terminals
• Miscellaneous & Concealed Terminals
• Chimney Terminals
• Compliance: UL listed

 

 

 

 

TerraFill^® | Low-Resistivity Grounding Backfill

Provides a simple method to substantially lower the earth resistance of grounding systems. When used in conjunction with copper grounding equipment, Terrafill will lower the contact resistance to earth by up to forty percent.

Terradyne^® | Electrolytic Grounding System

TerraDyne^® Electrolytic Grounding System is a multipurpose grounding system. It has been designed to provide long term protection from lightning, electrical transients, static discharges, electromagnetic interference and other electrical hazards. TerraDyne^® EGS was designed for use in any type of soil condition. TerraDyne^® EGS is guaranteed for 30 years, with an expected life of at least 50 years. The systems are available in vertical or horizontal models.

TerraBar^® | Grounding Bars/Bus Bars

Alltec Corporation manufactures TerraBar^® brand copper bus bars and offers a full line of available hole patterns and sizes along with all the associated mounting hardware and insulators.

TerraWeld | Exothermic Welding System

The TerraWeld^® Exothermic Welding System provides the ultimate in permanent molecular bonding. The process of exothermic welding, in which no outside source of heat or power is required, is the universally preferred method of making electrical connections of copper-to-copper or copper-to-steel.

---

• Capacitor Banks
• Transformers
• AVR
• UPS
• Industrial Batteries
• Security Devices (CCTV, Door Access System, PABX & Automated Parking System)

---